Insights
Connected buildings and homes: the standards, the protocols and the decisions that are hard to reverse later.
15 guides
How WHO, ICH and FDA guidance define temperature logging frequency, sensor placement, mean kinetic temperature, alarm thresholds and audit trail evidence for cold chain monitoring, and where the published rules for storage and transport genuinely differ.
8 min read
How Dubai's smart meter network was rolled out, what the DEWA app actually shows a resident about consumption, and how the progressive slab tariff for electricity and water is calculated against a month's reading, worked through with real DEWA figures.
6 min read
How a building automation system splits control between a local controller and a vendor's cloud: what must keep working if the connection drops, where a slow round trip costs you, and what a firmware update mechanism should do before it ships.
7 min read
A camera on a front door or a tower's boundary wall sits inside two separate systems: SIRA's licensing and technical rulebook for regulated buildings, and the general federal law on recording people. What each one actually requires.
6 min read
What IP65 and IP67 actually test under IEC 60529, why operating temperature, UV resistance and condensation are separate specifications the ingress code does not cover, and what that means for equipment mounted outdoors in Dubai.
6 min read
KNX is a wired bus standard with a topology of lines, areas and power supplies fixed by the KNX Association. This sets out those published limits, the commissioning tool, and where KNX's own wireless variant runs out of range.
7 min read
How UAE spectrum rules, coverage and battery design split LoRaWAN from NB-IoT for building sensors, with the frequency bands, power limits and data rates each relies on, and where each earns its keep.
7 min read
Matter is an application protocol and Thread is a network protocol, and the difference decides whether a home needs a border router. What the published specifications cover as at September 2026, and where controller support still stops short.
7 min read
What first fix locks in on a villa lighting system: the DALI bus limits that decide how it is split, the 0-10 V channel count that cannot be changed later, driver inrush against breaker size, and where drivers can safely sit.
7 min read
How to add smart switches, sensors and video doorbells to a Dubai rental without opening a wall: the neutral wire question, no-neutral relay modules, the plug and wiring rules DEWA enforces, and who has to approve the work.
7 min read
Installing a smart lock on a shared entrance or an apartment door in Dubai touches jointly owned property law, fire door certification and Dubai's security regulator all at once. This sets out who has to approve it and which locking behaviour the fire code allows.
6 min read
How Al Sa'fat, Dubai's green building system, and the Dubai Building Code it defers to set out lighting control and occupancy sensing requirements for new buildings, from office lighting zones and villa bathrooms to hotel guest rooms and Platinum-tier HVAC zones.
7 min read
Clamp meters, per-circuit sensors and smart plugs each measure a different slice of a house's wiring, and none of them saves a single watt by itself. What each instrument actually reveals, and where the honest limits of the savings sit.
8 min read
How passive infrared and millimetre-wave radar sensors decide a room is occupied, why PIR misses someone sitting still, what causes mmWave's own false alarms, how zones are configured, and where the extra cost is worth paying.
7 min read
How Zigbee, Z-Wave, Thread and Wi-Fi differ in frequency band, mesh behaviour, power draw and device limits, and where each protocol's own design trade-offs make it the right or wrong choice for a given installation.
7 min read
Enquiries
Partnership, banking or media enquiry?
